Scaffold Tower Hire in Reading, Berkshire
Scaffold tower hire in Reading for stable access on decorating, maintenance, fit-out and construction work. Coppard supplies narrow and wide towers at a range of platform heights across Berkshire. Call 0118 979 2828 with the working height and the clear floor space you have.
A tower gives a proper working platform where a ladder cannot, which on Reading work often means shop and office fit-outs with repeated access along a wall or ceiling. Three things settle the hire: the platform height the task needs, a width the floor and the doorways will take, and whether the tower can be built and moved in the space without cutting corners.
The Range: Narrow and Wide Towers at Several Platform Heights
Coppard hires a narrow tower for tight spots and a wider one for a bigger base and platform, each at a choice of platform heights, and the Coppard scaffold tower range sets out the combinations. For a Reading shop refit or an office strip-out the narrow tower usually earns its keep by fitting through doors and down aisles; on an open floor or a larger hall the wider tower is steadier and gives more room to work off.
Ask by the platform height the job needs and the floor area you have free, not by a headline tower height. The team can then confirm which width and height pairing is available for your dates, along with the component pack that goes with it.
Measure the Clear Floor Space, Including Doors and Aisles
Width is dictated by what the tower must pass through and stand in, so measure the doorways, the aisle gaps between fixtures or racking, and the clear patch you need to build it, not only the final working spot. Where a Reading unit is still trading or occupied, leave room to erect and reposition the tower without closing off a fire exit or an aisle customers are using.
Use the Reading Tool Rental Service to confirm the width and platform-height pairing that suits the space. Indoors, mind the ceiling and anything mounted below it; outdoors, keep enough clear ground around the base to handle the parts safely as you build, rather than forcing the tower into a corner that will not take a proper assembly.
Pick the Platform Height from the Task, Not the Ceiling
Set the platform to where your hands need to be, allowing for a safe working height of roughly two metres above the deck, rather than measuring to the top of the wall or the ceiling. Going higher than the work needs just adds parts, build time and floor space; going lower pushes the user to overreach.
Reading town-centre units often have double-height retail space or a stairwell to deal with. Where the work spans levels like that, note the highest and lowest points you must reach so the tower is configured for both at the planning stage instead of being adjusted awkwardly on site.
Build and Move the Tower Only to the Approved Method
A tower is stable when it is put up exactly as the manufacturer specifies for the kit supplied, guardrails and bracing included. A level shop or office floor makes that easy; rougher or outdoor ground calls for more attention to the footings. What you must never do is drop parts to slim the tower down or ease it through a narrow gap.
If the job runs along a wall or between bays, some towers may be repositioned instead of dismantled, but only by the maker’s permitted method, with the deck cleared of people and loose kit and the path checked for low obstructions and floor steps. Need a different height at the next spot? Take it down and rebuild it correctly rather than altering it in place.
Give the Reading Depot the Height, the Width and the Setting
Tell the team the platform height you need, the free floor area and doorway widths, indoor or outdoor use, and whether the tower has to travel during the job. Flag an occupied or public building, since that governs when and how it can be built and shifted.
With that, they can match the supplied parts to a proper, approved configuration rather than guessing from height alone. Call 0118 979 2828 once you have measured up, for work across Reading and the Thames Valley, so the tower that turns up is one that can be built and used safely where it is going.
Frequently Asked Questions - Scaffold Tower Hire in Reading, Berkshire
Which width tower do I need for an interior fit-out?
Usually the narrow one, since it is the tower that clears standard doorways and fits down aisles between racking or fixtures, which is what most Reading shop and office fit-outs need. The wider tower gives a larger, steadier platform where the space allows, such as an open hall or outdoors. Measure your doorways and free floor area first, and never slim a tower by leaving parts out to make it fit a tight space.
How do I choose the platform height?
Measure to where your hands need to work, not the ceiling, and allow for the safe working height sitting about two metres above the deck. Pick the platform that lets you reach the task without climbing above the guarded level. Too tall wastes parts, time and floor room; too short invites overreaching. For a double-height unit or a stairwell, plan for the highest and lowest points at once so a single set-up covers the job.
Can I move an assembled tower along the job?
Sometimes, but only by the movement method the maker permits and only with the deck cleared of people, tools and loose materials. Check the floor for steps and the route for low obstructions first. Never strip off guardrails or bracing to get through a tight spot. If the next position needs a different height or base, dismantle and rebuild to the approved configuration rather than shifting an altered or part-built tower, which is where tower incidents tend to begin.
Can a tower be used in an occupied shop or office?
Yes, provided it is built and used to the maker’s instructions and the setting is planned. In a trading or occupied Reading building that means keeping the tower and its assembly away from fire exits and aisles in public use, and choosing when it can be built or moved around people. Confirm the floor is sound and level, and that the ceiling and any fittings allow the platform height you need, before it is delivered.
What UK rules apply to scaffold tower work at height?
The Work at Height Regulations 2005 require work at height to be planned, supervised and done by competent people with suitable equipment. You can read the official regulations at Work at Height Regulations 2005 on legislation.gov.uk. Erecting and using a tower must also follow the maker’s instructions and approved configuration, including the guardrails, bracing, platform positions and any limits that apply to the exact equipment supplied.
Need scaffold tower hire in Reading?
Tell us the working height, the floor space and doorway widths, and whether it is indoors or outside. Call Coppard on 0118 979 2828.
