Telehandler Hire in Reading, Berkshire
A mezzanine deck part-way through a fit-out holds less weight than the finished floor will. Our Reading depot asks what stage the decking is at before sending a telehandler anywhere near it.
Floor loading changes as a fit-out progresses, not just once at the end. Our Reading depot checks the stage a build has reached before confirming which telehandler goes out.
A Half-Finished Mezzanine Carries Less Than a Finished One
Steel beams go up first, then decking panels, then screed, and each stage of a mezzanine floor carries a different safe load than the last.
Placing a pallet of partition studwork onto bare decking before the screed has gone down can overload a point load the finished floor would handle easily. Spreading the weight across more than one bearer, or waiting for the next stage, usually solves this.
Give the depot the actual construction stage the mezzanine has reached, not just its finished rating from the drawings. That detail changes how a load gets placed far more than the telehandler model chosen to lift it. A site engineer new to a project should always be shown the current load plan rather than relying on a figure carried over from an earlier visit.
Our Telehandler Range
Our Reading stock covers several reach and capacity classes, suited to placing material onto a part-built mezzanine as well as standard groundwork. Every other service from this depot is listed on our Reading Forklift Rental Service page, and reach figures for each model sit on our Telehandlers collection.
Say what stage the floor is at and roughly how the load needs spreading, and our team narrows the choice quickly.
Call 0118 979 2828 with those details and a model for your Berkshire fit-out gets booked there and then. A jib attachment for precise placement through a tight gap is also listed on the same collection page, alongside standard forks and a muck bucket.
Telehandler Hire for Reading and Wokingham Fit-Outs
Fit-outs on the upper floors of a business park unit tend to need careful placement through a single window or gap, because the rest of the floor plate is often already handed over to another trade.
Ground-floor units near Wokingham usually give more room to work, so placement is less about precision and more about simply getting enough material onto site each morning.
Tell the depot which floor the mezzanine sits on and how it is being accessed, since a tighter upper floor changes the approach more than the overall size of the building does. A loading bay booked well ahead of the actual delivery date usually avoids the worst of any queuing on a busy business park.
What's Included With Every Telehandler
A load chart matched to the stage of construction, a service record and a brief walk-round happen before the machine ever reaches the mezzanine.
Forks and a jib both come as standard options, fuel is filled both ways, and normal wear during the hire carries no extra charge.
Need the load plan revisited once the screed goes down and the rating changes? Call 0118 979 2828 and the walk-round gets repeated for the new stage, so nobody is working from an outdated figure. A written copy of the load plan is also left with the site supervisor, so the figure used is never just a verbal note from the walk-round.
Why Choose Coppard
Decades of plant hire across Berkshire mean our Reading depot has seen enough staged mezzanine builds to ask about construction progress before quoting a machine, not after.
Constructionline and CPA membership sit behind a simple rule: every machine is checked and logged before it leaves the yard.
Call 0118 979 2828 for a straight answer on price and timing. A telehandler booked against the wrong load stage costs a fit-out more in delay than getting the detail right from the first call. That approach also means a return visit later in the same fit-out starts from an accurate picture rather than an outdated one, whatever stage the site has reached by then.
Frequently Asked Questions
Can a telehandler place material onto a part-built mezzanine?
Yes, provided the construction stage is known rather than just the finished floor rating. A bare deck without screed takes less point load than a finished one, so describe the stage honestly rather than quoting the drawing figure. Our team can then plan where the load actually sits on the structure. A site engineer can confirm the current stage over the phone if the person booking is not sure themselves, which avoids a guessed figure being used by mistake.
What reach do I need for a mezzanine fit-out?
That depends on the floor height and where the access gap sits, window, gable end or an open bay. Describe both and a suitable model from the Reading range gets confirmed. A measured height beats an estimate, since fit-out floor-to-floor heights vary more between business parks than expected. Floor-to-floor height on a converted office block can differ a good deal from a purpose-built business park unit, so treat the two separately rather than assuming a standard figure applies.
Does the telehandler stay on site for the whole fit-out?
It can, with the same machine used across several visits as the structure progresses, or booked fresh for each delivery if that suits the programme better. Mention which arrangement works for your contract when booking, since both are common on longer Berkshire fit-outs. A standing arrangement across several visits also usually works out simpler to schedule than renegotiating the machine for every single delivery through a long fit-out.
Can the load chart be updated as the build progresses?
Yes, the chart is reissued whenever the construction stage changes enough to affect the safe load. Ring the depot once screed or finishes go down, and an updated figure is confirmed before the next delivery, rather than working from the original drawing rating throughout. This keeps everyone on site working from the same figure, rather than an outdated chart left over from an earlier stage of the job.
What UK rules cover lifting onto a partly built floor?
The Lifting Operations and Lifting Equipment Regulations 1998 set out duties for lifting equipment generally, telehandlers included. Coppard checks and records every machine before hire. Confirming the actual load the structure can bear at each stage, separate from the machine itself, remains the responsibility of the site engineer. This sits alongside, rather than instead of, the structural checks a site engineer carries out on the floor itself.
Looking for Telehandler Hire near me?
Call Coppard at 0118 979 2828 to discuss which telehandler suits your fit-out stage, and to book a delivery date.
