Lighting Hire in Melksham, Wiltshire
Lighting hire in Melksham for warehouse high-bay areas, mezzanine undersides and industrial unit work where existing overhead lighting may not reach the task. Coppard supplies 110V floodlights, festoon lighting and a towable light tower across Wiltshire. Call 01380 828988 with the ceiling height, the mezzanine layout, and what task needs lighting.
A large warehouse usually already has overhead lighting, but that lighting is designed for the open floor, not for the task-level work that happens underneath a mezzanine, inside racking, or high up near the roof structure itself. The existing lighting can leave real shadow exactly where temporary work needs to happen, which is a different problem from lighting a space with no fixed lighting at all.
Existing Overhead Lighting Does Not Reach Every Task
A warehouse’s high-bay lighting is built to illuminate the general floor area from a considerable height, and that leaves real shadow underneath a mezzanine, inside tall racking, or close to roof-level structure where maintenance or installation work often needs to happen. Do not assume a well-lit-looking warehouse floor means every task area within it has usable light.
Identify the specific task locations that sit in the existing lighting’s shadow, through the Melksham Tool Rental Service, and treat those as needing their own dedicated task lighting rather than assuming the building’s overall illumination covers them. A space that reads as bright when you walk in can still leave a maintenance point genuinely dark.
Light the Mezzanine Underside as Its Own Zone
The underside of a mezzanine floor is a classic shadow zone in a warehouse, since the mezzanine deck itself blocks the high-bay lighting from reaching underneath, and any work happening there, storage, picking, light assembly, maintenance, needs its own lighting treated as a distinct area rather than an extension of the main floor’s illumination. The Coppard electrical and lighting range covers floodlights suited to this kind of localised, lower-height task lighting.
Consider the underside height specifically when choosing fittings, since a mezzanine clearance is often considerably lower than the main warehouse ceiling, changing both the fitting type and the positioning compared with lighting the open high-bay area above.
Match the Fitting to the Task at Racking or Roof Height
Work inside or beside tall racking, or up near roof-level structure, often sits well outside the reach of general floor lighting and needs its own dedicated fitting positioned close to the actual task rather than relying on ambient light from a considerable height above. Festoon can run along a racking aisle or a walkway needing continuous light; a floodlight suits a fixed task point.
Where work is genuinely high up, near roof trusses or in a high-bay area beyond normal reach, plan the lighting position alongside the access method, since a light aimed from ground level rarely serves work happening thirty feet up as well as a fitting positioned closer to the actual task.
Plan the 110V Supply Around Existing Warehouse Power
A commercial unit usually has power already installed, but confirm what is actually near the specific task location, since the nearest socket to a mezzanine underside or a high racking aisle may still be some distance away. Plan the transformer position and lead route to reach the actual task point without crossing forklift routes or walkways.
Where several task-lighting points are needed across a large warehouse floor, consider whether one transformer serving multiple leads or several smaller set-ups suits the layout better, based on where the tasks actually are rather than where the nearest existing power point happens to sit.
Tell the Melksham Depot Where the Existing Light Does Not Reach
Describe the warehouse or unit, its ceiling height, whether there is a mezzanine, and specifically where the existing overhead lighting leaves shadow relative to the task. Give the hours the work runs and the power available near each task location.
That lets the team confirm floodlights, festoon or a tower suited to filling the gaps in existing warehouse lighting, for work across Melksham and the wider Wiltshire area, rather than assuming a bright-looking building needs no additional lighting at all. Call 01380 828988 once the task locations and the existing lighting shadow are identified.
Frequently Asked Questions - Lighting Hire in Melksham, Wiltshire
Why would a warehouse with lights already installed need more?
Because high-bay lighting is built for the general floor area from a considerable height, and that leaves real shadow underneath a mezzanine, inside tall racking, or near roof-level structure where maintenance or installation work often happens. A warehouse can look well lit walking in while a specific task point sits genuinely dark. Identify the actual task locations sitting in that shadow rather than assuming the building’s overall lighting covers everything.
What lighting suits working under a mezzanine floor?
Treat it as its own zone, since the mezzanine deck blocks the high-bay lighting above from reaching underneath. A dedicated floodlight suited to the lower clearance height under the mezzanine works better than relying on the main floor’s illumination, and the underside’s typically lower ceiling changes both the fitting choice and its positioning compared with lighting the open warehouse floor.
How do I light work happening high up near racking or the roof?
Position a dedicated fitting close to the actual task rather than relying on light from a considerable height above, since general floor lighting rarely serves work happening well above it. Festoon can run along a racking aisle needing continuous light; a floodlight suits a fixed high point. Plan the lighting position alongside the access method for genuinely high work, since ground-level lighting alone rarely reaches it adequately.
Is the existing warehouse power enough for task lighting?
Check what is actually near the specific task, not just whether the building has power somewhere. The nearest socket to a mezzanine underside or a high racking aisle can still be some distance from where you need light. Plan the transformer position and lead route to reach the task point without crossing forklift routes, and consider whether one transformer serving several leads suits multiple task points better than separate small set-ups.
What UK rule covers lighting inside a commercial unit?
Regulation 35 of the Construction (Design and Management) Regulations 2015 requires sites, approaches and traffic routes to have suitable and sufficient lighting, with emergency lighting where a failure would create a risk. The text is at CDM 2015 Regulation 35 on legislation.gov.uk. In a Melksham warehouse that means checking the actual task areas, not just the general impression of a well-lit floor, since existing lighting can still leave genuine gaps.
Need lighting hire in Melksham?
Tell us where the existing warehouse lighting leaves shadow and what task needs lighting there. Call Coppard on 01380 828988.
