Pump Hire in Godstone, Surrey —
Get Water Off Site Near You
The water is rising and it needs to go. Centrifugal, submersible and hand pumps from our Godstone depot move it fast. Call 01883 743 322.
54 Years Trading
CPA Member
Constructionline
Fully Insured
Water in the wrong place is one of the most common site problems. If you are searching for pump hire near me in Surrey, our Godstone depot stocks the full range — from 1-inch hand pumps to 3-inch centrifugals. Call 01883 743 322.
Pumps Available to Hire
We stock centrifugal pumps in 1-inch, 2-inch and 3-inch, submersible pumps, residue pumps, hydraulic oil-driven pumps and hand pumps. The right pump depends on the liquid type, flow rate required and site configuration.
Full specifications for our complete pump range are listed in the Coppard online catalogue.
Choosing the Right Pump
The most common mistake is choosing a pump sized for worst-case rather than actual flow rate. An oversized pump drains quickly then runs dry — damaging the pump. An undersized pump on a site with significant groundwater ingress falls behind.
Weald Clay south of the M25 is highly impermeable. Groundwater accumulates in any excavation deeper than 500mm from October through April. A 2-inch centrifugal kept on site through drainage season is standard practice for groundworks contractors around Redhill, Reigate and Godstone. Call 01883 743 322 with the situation and we will confirm the best pump.
Pump Hire Across Surrey, Kent and South London
Our Godstone depot delivers pumps across Redhill, Reigate, Oxted, Caterham, Crawley, Dorking and Sevenoaks, plus Leatherhead, Sevenoaks, Westerham, Lingfield, Horley, Guildford and South London. Most pumps go out next day. Call before 8am for same-day availability.
Looking for the best pump hire near me? Contractors across Redhill, Reigate, Oxted, Caterham, Crawley, Dorking and Sevenoaks hire from our Godstone depot regularly. Hoses and couplings are available separately.
Pump Hire for Agricultural and Estate Use
Farms and estates need temporary pumping beyond permanent installations. Winter flooding, irrigation supply and fuel transfer are recurring requirements. The 3-inch centrifugal clears most average paddocks in a few hours. For fuel transfer, the Patay hand pump provides a simple non-electric option.
Why Hire Pumps from Coppard?
Coppard has supplied pumps to construction sites, farms and estates across Surrey and Kent for 54 years. We stock the sizes that actually get used in this region — the right pumps for the groundwater conditions and soil types you encounter. Call 01883 743 322.
Searching for the best pump hire near me? Coppard’s Godstone depot covers Godstone, Redhill, Reigate, Oxted, Caterham, Sevenoaks, Westerham, Crawley, Horley, Dorking, Leatherhead, Lingfield, Guildford and South London. Call 01883 743 322.
For the full range of Plant & Machinery Hire available from our Godstone depot, visit our Plant & Machinery Hire page.
Browse the full Pump Hire catalogue on the Coppard website — full specifications, models and current availability.
Frequently Asked Questions — Pump Hire
What is the difference between a centrifugal and submersible pump?
A centrifugal sits outside the water and draws it up through an inlet hose — needs priming. A submersible sits in the water and pushes it up — no priming needed. For basements and tanks, the submersible is usually more practical.
How far can the pump discharge?
A 2-inch centrifugal pushes water 30 to 50 metres horizontally. A 3-inch reaches up to 80 metres. Vertical lift reduces range significantly. Discuss specific distances with us before hiring.
Can I pump dirty water?
Standard pumps handle lightly silted water but not thick sludge. Pumping clay-heavy groundwater wears the impeller faster. If your water contains significant solids, discuss with our team — we may recommend a different setup.
Do I need permission to discharge?
Usually yes. Discharging to a sewer needs water company permission. Discharging to a watercourse needs Environment Agency consent plus a settlement tank. Check before setting up any discharge.
Can I leave the pump running unattended?
Centrifugal pumps must not run dry. A float switch automatically starts and stops the pump as water rises and falls. Submersible pumps with float switches are the most reliable option for unattended dewatering.
Which pump do I need for a flooded excavation or site?
The right pump will depend on how much water needs removing, the lift height, the distance to the discharge point and whether the water contains mud, sand or other solids. Submersible pumps are often suitable for relatively clean water, while diaphragm or specialist pumps may be better for dirty water and heavier debris. The Environment Agency explains that water removed from an excavation may require permission before it is discharged in its guidance on temporary dewatering from excavations. Tell Coppard’s Godstone team the approximate water depth, condition of the water and proposed discharge distance, and they can recommend a pump capable of clearing the site efficiently.
Need Pump Hire near you in Surrey or Kent?
Call 01883 743 322. Same-day collection from Godstone. Delivery across Surrey, Redhill, Reigate, Oxted, Caterham, Crawley, Dorking and Sevenoaks and beyond.
