Wacker Neuson Trench Roller RT-SC3

Trench Roller RT-SC3: smart remote-controlled trench roller

The RT trench roller with the SC3 infrared-remote control offers proven compaction results with safer operation. The smart control uses an infrared signal with line-of-sight control. The articulated trench roller with padfoot drums offers below the axle exciter in each drum to allow for the efficient transfer of compaction energy to the soil for superior compaction results. The compaction of excavations and sub bases of foundations, roads and parking lots is the RT’s specialty.

Media and Downloads


Area Capacity: 990 m NN
Gradeability: 50 %
Centrifugal Force Max: 68.4 KN
Travel Speed: 1.3 - 2.5 km/h
Exciter Type: Hydraulic
Length: 1,853 mm
Width: 820 mm
Height: 1,268 mm
Operating Weight: 1,465 kg
Dry Weight: 1,428 kg

Additional Information

Infrared Line-of-sight Remote Control

  • The operator is removed from the hazards of operating compaction equipment inside a trench or near other equipment.
  • The operator is protected from dust, exhaust fumes and noise emissions
  • A proximity sensor between the operator and the machine automatically disables the machine within a range of 2 meters

Low Exciter Position

  • The below the axle exciter system in each drum allows for more efficient transfer of energy to the soil for superior compaction results.
  • With the exciters positioned below the axle , the center of gravity is also lower which improves the stability of the machine and lowers the risk of the machine tipping over over.
  • As the compaction energy is transferred directly to the soil, the wear of the machine is reduced. This decreases the overall maintenance cost of the machine.

Low Maintenance Cost

  • Permanently lubricated exciter and drive systems are maintenance free making it most economical to run throughout its entire life. No drive or exciter oil changes are required.
  • All other machine components are easily accessible thanks to the wide opening hoods, which makes cleaning and maintenance an easy daily task.

Tip-Over Protection

  • The roller can be set for lockout or non-lockout modes that will shutdown the machine should the side-to-side operating angle exceed 45° and any required inspections or repairs can be performed to avoid any damage to the engine or other components before the machine can be restarted. This feature reduces the chance for costly repairs.

Flexible Drum Width

  • Dual section drums allow for convenient conversion widths of 82 cm to 56 cm. One machine can cover two operating widths depending on the requirements of the application by removing the outer extensions.
  • The easy to remove extensions have a central mounting system that protects the bolts from exposure to damage during operation

More Equipment

[#Beginning of Shooting Data Section]
Image Size:L (4800 x 3200), DX
17.2.2017 11:11:35.10
Time Zone and Date:UTC+2, DST:ON
Lossless Compressed RAW (12-bit)
Artist:JORMA RAJAMAKI                      
Copyright:(c) JORMA RAJAMAKI  jorma@studiorajamaki.fi           
Image Comment:(c) jorma@studiorajamaki.fi         
Nikon D800
Lens:24-70mm f/2.8G
Focal Length:70mm
Focus Mode:Manual
AF-Area Mode:Single
AF Fine Tune:OFF
Shutter Speed:1/160s
Exposure Mode:Manual
Exposure Comp.:0EV
Exposure Tuning:
ISO Sensitivity:ISO 100
White Balance:Auto2, 0, 0
Color Space:Adobe RGB
High ISO NR:ON (Normal)
Long Exposure NR:OFF
Active D-Lighting:OFF
Image Authentication:
Vignette Control:OFF
Auto Distortion Control:OFF
Picture Control:[NL] NEUTRAL
Quick Adjust:-
Filter Effects:
Optimize Image:
Color Mode:
Tone Comp.:
Hue Adjustment:
Altitude Reference:
Map Datum:
[#End of Shooting Data Section]

Not sure what you are looking for?

Contact our expert team today to discuss your needs and we'll find the right equipment for you!

Contact Our Experts Today

Make an Enquiry

Please complete the form below and a member of staff will contact you shortly.

    What do you require? (required)

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.