Chipper Hire in Crowborough, East Sussex
Wood chipper hire in Crowborough for branches, hedge cuttings and site clearance. Coppard supplies tracked and towable chippers for landscaping, tree work and clearance across East Sussex. Call 01892 662777.
A chipper turns bulky branches and hedge cuttings into a small, easy output right where you are working. The machine you need is set by the thickest branch, not the average one, and by how it reaches the material. Tell the Crowborough team the largest branch size, the access width and where the chip will go, and the hire can be matched to the job.
Size the Chipper from the Largest Branch, Not the Average One
A heap of hedge cuttings may be mostly small stuff, yet still hold the odd thick limb that decides the machine you need. Work out the largest realistic branch diameter, and think about whether the timber is straight, forked, wet or full of side growth. The feed opening is only part of the story, because awkward, dense branches slow the work long before the machine reaches its top diameter.
If big timber is only a small part of the job, it can be cheaper to set it aside for another method than to hire a larger machine for everything. Giving the depot a real maximum branch size, rather than “a lot of branches”, leads to a better match. You can also see the current Coppard chipper range to compare the tracked and towable machines kept in the fleet.
Pick Tracked or Towable Around Access and Ground
A tracked chipper moves across a site under its own power, which helps when the chipping point is away from a road or hard surface. A towable machine suits jobs where a vehicle reaches the work easily and the chipper can sit near a driveway, road edge or central pile. The route to the work matters as much as the feed size.
Gates, soft lawns, slopes and tight turning space can rule out a machine that would otherwise be ideal. Before you book, measure the narrow points and think about how the chipper will reach each pile without dragging branches long distances by hand. If you are searching for chipper hire near me and need it quickly, having the access width ready speeds up the whole booking.
Set Up the Work Around Feed and Discharge
The job runs faster when branches arrive at the hopper from one direction and the chip leaves the machine without crossing that path. Place the chipper so the operator has a clear zone, branches can go in butt-end first where that suits, and the chute points at the collection area. Do not let the chip pile grow so close that it blocks the machine or forces you to keep moving it.
On a larger clearance, make separate stacks: chip-ready branches, timber that is too big, and waste that should not go through the machine at all. This simple flow cuts handling, keeps the feed area clear, and makes it easy to see whether the chipper is keeping pace with the cutting crew.
Keep Stones, Metal and Contaminated Material Out
A chipper is built for clean woody material, not mixed site waste. Wire, nails, stones and soil-heavy roots can damage the cutting parts or throw out dangerous material. Check branches from old boundaries, dumped heaps and clearance piles before feeding them, as fencing wire often hides inside hedge growth.
Treat root balls and soil-covered timber separately. Agree who controls the feed zone so nobody adds unsuitable material while the operator is focused on the machine. A cleaner feed protects the chipper, gives better chip and prevents the stoppages that eat into a hire booked around a tree crew or clearance schedule.
Book Chipper Hire from the Crowborough Depot
The finished chip can be a useful landscaping material, but only if there is somewhere sensible to put it. Decide whether it stays on site for paths or mulch, gets loaded for removal, or goes straight into a trailer. When you book through the Crowborough Tool Rental Service, give the largest branch size, the access width, a rough volume and where the chip will go, and the team can confirm what is available across East Sussex.
Call 01892 662777 before cutting starts, so the chipping and the chip disposal are planned together rather than sorted out halfway through the job.
Frequently Asked Questions - Chipper Hire in Crowborough, East Sussex
What information helps you match the right chipper to my job?
Tell the depot the largest branch diameter you expect, the width of the tightest access point, the rough volume of material and where you want the chip to go. A pile can look like small cuttings but hold a few thick limbs that decide the machine. Those few details let the Crowborough team suggest a machine that will keep pace with your cutting without being oversized for the work.
Should I choose a tracked or towable wood chipper?
Choose around site access and where the machine needs to work. A tracked chipper can move off hardstanding under its own power and may suit gardens, estates or clearance sites where material is spread over a wider area. A towable machine can be efficient where a vehicle reaches the processing point and the chipper can stay near a road or driveway. Check gate width, slopes, soft ground and turning space before booking either type.
What material should not be fed into a wood chipper?
Keep metal, wire, stones, heavily soil-covered roots and non-woody waste out of the machine. Old hedges and boundary material need a close look, because fencing wire can hide inside the branches. Root balls can carry enough soil and stone to damage the cutting parts. Set up a clear feed pile and sort out unsuitable material before you start, rather than expecting the operator to spot every contaminant while the machine is running.
Can the wood chip from the job be kept and reused on site?
Often yes, as long as the chip suits the use you have in mind and the project allows it. You can keep it for paths, landscaping or mulching, or load it for removal. Decide where it will go before you position the chipper, so the discharge chute points at the right pile, trailer or container. Planning the output route avoids double handling and stops a growing chip heap blocking the feed area or the access around the machine.
What UK rules apply to hired wood chippers used at work?
The Provision and Use of Work Equipment Regulations 1998, known as PUWER, require work equipment to be suitable, kept in good order and used by people who have had the right information, instruction and training. You can read the official PUWER 1998 legislation on legislation.gov.uk. Always follow the maker’s instructions for the exact chipper supplied, including feed procedure, guarding and the emergency controls.
Need chipper hire in Crowborough?
Tell Coppard the largest branch diameter, the access width, the rough volume and where the chip will go. Call 01892 662777 to confirm a suitable machine.
