Telehandler Hire in Crowborough, East Sussex
A telehandler lifts, places and loads materials where a forklift cannot reach. Coppard’s range runs from 0.7T to 12T+. Every machine is sized to your site and your load, ready for collection or delivery today.
A telehandler combines the reach of a crane with the mobility of a forklift. It lifts pallets, blocks and materials up and across a site in one movement. Coppard holds a full size range at Crowborough. Call and describe the job, and we will match the right machine to it.
Choosing the Right Telehandler for the Job
A small extension rarely needs the same machine as a new build with scaffolding to reach. Lift height, reach and load capacity all change which telehandler fits the brief. Pick the wrong one and the job slows down or stops altogether.
Tyre type matters too. Solid tyres suit a hard standing yard. Pneumatic tyres cope far better with rough or muddy ground on a half-finished site. Getting this wrong means the machine gets stuck before it even starts work.
Tell the depot the job, the ground and the heights involved. That way the first machine sent out is the right one, rather than a second visit to swap it for something bigger or smaller.
Our Telehandler Range
Coppard’s Crowborough telehandlers run from compact 0.7T machines for tight residential plots up to 12T+ units for large commercial builds. See the full size range on our Crowborough Forklift Rental Service page, covering every hire category from this depot. Current stock is listed on the Telehandlers collection.
Reach heights vary by model. Some are built for standard lift work, others for extended-reach jobs such as scaffolding and roof-level deliveries. Tell the depot the height you need to reach and the weight of the load you are lifting.
The depot will confirm the right machine and a delivery slot there and then. Call 01892 662777 to get started. Larger reach-height models sometimes need a short lead time moving between depots, so an early call helps secure the exact dates you need.
Telehandler Hire for Crowborough Sites
Crowborough, Tunbridge Wells and Uckfield sites range from tight town-centre plots to open rural builds. The right telehandler changes with the access. A narrow driveway calls for a compact machine over a full-size one every time.
High Weald clay holds water through autumn and winter. This can leave yards and half-built access roads soft underfoot for weeks at a time. Pneumatic tyres cope far better here than solid ones on a wet site.
Tell the depot about your site before you book. They can flag anything that might affect which telehandler suits the job best, based on exactly where you are working. A short description of the gate width or the slope of the plot is often all the depot needs to rule out the wrong size machine.
What's Included With Every Telehandler
Every telehandler arrives serviced, tested and ready to work. Forks are fitted as standard, with other attachments available on request. A quick handover covers the controls before the operator takes over on site.
Fuel is topped up before delivery. The depot will confirm how refuelling works across a longer hire, so there are no surprises midway through the job. If the job needs a different attachment partway through, call 01892 662777 and the depot will arrange a swap.
Collection at the end of the hire is booked the same way as delivery. Give the depot a rough finish date, and they will confirm the exact slot nearer the time. Ring ahead where possible, since some attachments need a day’s notice to bring across from another depot.
Why Choose Coppard
Coppard has traded in the South East for 54 years, with depots across East Sussex and beyond. We are a CPA member and Constructionline registered. The paperwork side of hiring plant is already sorted before the machine even leaves the yard.
The Crowborough depot keeps a wide telehandler range in stock. This means fewer substitutions and fewer delays once a job starts, whatever size or reach the site calls for. Most calls get an answer on availability the same day.
Call 01892 662777 to check availability for your dates. Lift height and reach are the two questions our Crowborough team asks before anything else, rather than leaving the choice to a brochure photo. Depots across East Sussex and beyond mean a wide telehandler range is kept close by, so swapping size at short notice rarely means a long wait.
Frequently Asked Questions
What size telehandler do I need for a house extension?
A compact 0.7T to 3T machine covers most single-storey extensions. It handles blocks, timber and roofing materials without needing much turning room on site. Larger two-storey builds, or anything needing scaffold deliveries, may need a bigger machine with greater reach instead. Tell the depot the job and the access, and they will suggest the right size rather than the largest one sitting in the yard.
Do I need a licence to operate a hired telehandler?
Yes. Anyone operating a telehandler needs the relevant category on their NPORS or CPCS card. It counts as lifting equipment under UK rules, so training is not optional. If you do not have a ticketed operator, Coppard offers operated hire instead, where a certified driver comes with the machine. Ask the depot which option suits your job best when you call to book. Training and competence are a legal requirement, not an optional extra, so Coppard will always ask which card the operator holds before the machine is confirmed.
Can a telehandler be delivered straight to site?
Yes. Delivery is available on most telehandler hires, with early morning slots for jobs that need an early start. Tell the depot your site address and preferred time when you book. Describe any access issues too, such as narrow gates or soft ground, so the delivery driver can plan the route and avoid a wasted trip to the wrong entrance. Tell the depot the site address and preferred time when you book, and they will confirm the slot the same call.
What attachments are available for a hired telehandler?
Forks are fitted as standard on every machine. Buckets, jibs and other attachments are available to hire alongside the telehandler, or separately through the attachments collection. Tell the depot what the job involves and they will recommend the right attachment for it rather than the most common one. Attachments can usually be swapped partway through a longer hire if the job changes shape. Tell the depot what the job involves and they will recommend the right attachment for it.
What UK rules cover lifting operations with a hired telehandler?
The Lifting Operations and Lifting Equipment Regulations 1998 set out duties around the safe use, inspection and examination of lifting equipment. This covers telehandlers used to lift and place loads on any construction site. Coppard’s machines are maintained and inspected to meet these rules before every hire goes out, so you do not need to arrange a separate inspection before the job starts. This is checked before every hire leaves the Crowborough depot.
Looking for Telehandler Hire near me?
Call Coppard at 01892 662777 to discuss which telehandler suits your job, and to check availability for your dates.
