Vibratory Plate Hire in Brighton, West Sussex
Flat, Firm Sub-Base on the First Pass
Forward and reversible vibratory plates for every compaction job, available from our Southwick depot. Call 01273 596 979 to check availability.
54 Years Trading
CPA Member
Constructionline
Fully Insured
Paving, driveways and patios start with compaction. If your sub-base moves under a straight edge, the finished surface will follow. Whether you are compacting a domestic driveway or a commercial sub-base, getting the right size vibratory plate matters — Coppard stocks various sizes from domestic to commercial specification from our Southwick depot, all maintained and ready to work, with delivery available to Hove, Portslade and across West Sussex at short notice. If you are searching for vibratory plate hire near me in Brighton, call 01273 596 979.
What Vibratory Plate Do You Need?
The choice depends on your material, your area and your access. A forward plate suits driveways, patios and footpaths where you are compacting clean granular sub-base in one direction. A reversible plate handles larger areas and deeper fills — it compacts in both directions, covering more ground without turning.
On granular fills across Hove, Portslade and Burgess Hill, a vibratory plate consolidates Type 1, MOT and sharp sand effectively. On clay-with-flints backfill from the Downs, a plate alone may not be enough — clay is cohesive and responds better to impact compaction from a rammer. If your trench backfill is clay, call 01273 596 979 before booking a plate. We will confirm the best tool for your material.
Vibratory Plate Hire Range
New driveways and patios across Hove, Portslade and Shoreham-by-Sea start with sub-base preparation. If the sub-base is not compacted properly, the paving settles unevenly within the first winter. A vibratory plate locked in and run correctly gives you a sub-base that stays flat through frost and rain. The best results come from compacting in thin layers rather than one thick pass.
The Southwick depot stocks forward plates for domestic driveways and patio preparation. Reversible plates cover larger commercial areas and deeper compaction layers. Both run on petrol — start and go, no mains power needed.
A forward plate weighs around 50 to 90kg and fits through a standard side gate. A reversible plate is heavier — typically 130 to 400kg — and covers wider strips. For block paving, a paving pad attachment protects the finished surface during final compaction.
Full specifications for the complete vibratory plate range are listed in the Coppard online catalogue.
Vibratory Plate Hire Across Brighton and West Sussex
The A259 coast road connects our Southwick depot to Hove, Portslade, Shoreham-by-Sea, Lancing and Worthing. The A27 reaches Lewes and the A23 runs north towards Burgess Hill and Hassocks. Collection from the yard is straightforward — a forward plate fits in a van or estate car boot.
Contractors across Hove, Portslade, Shoreham-by-Sea, Worthing, Lewes and Burgess Hill hire from this depot regularly. Looking for vibratory plate hire near me? Same-day collection or next-day delivery across Brighton and West Sussex.
Collecting and Using Your Vibratory Plate
Forward plates are light enough to collect in a van. The yard team runs through the start procedure and safe use at collection. Key points: compact in layers no thicker than 150mm, overlap each pass, work from the edges inward.
Call 01273 596 979 to check availability.
On block paving projects, the final compaction pass beds the blocks into the laying course. Use the paving pad attachment to avoid scuffing the block surface. On larger commercial paving projects across Burgess Hill and Hassocks, a reversible plate covers the area faster. If you are working near listed buildings in Lewes or Steyning, take care around period surfaces.
Why Hire a Vibratory Plate from Coppard?
Coppard stocks the full compaction range — vibratory plates, wacker plates, rammers and rollers. If your job needs more than one type, we supply them from the same account. Call 01273 596 979.
Searching for the best vibratory plate hire near me? Coppard covers Brighton, Hove, Portslade, Southwick, Shoreham-by-Sea, Lancing, Worthing, Steyning, Henfield, Burgess Hill, Hassocks, Lewes, Newhaven, Peacehaven, Littlehampton, Arundel and Chichester. Call 01273 596 979.
For the full range of Plant & Machinery Hire available from our Southwick depot, visit the Plant & Machinery Hire page.
View the full Vibratory Plate Hire catalogue — specifications, models and current availability.
Frequently Asked Questions — Vibratory Plate Hire
What is the difference between a vibratory plate and a wacker plate?
They are the same machine — a flat-plate compactor that uses vibration. Vibratory plate is the generic term. Wacker plate comes from the manufacturer Wacker Neuson. Both compact granular materials like sub-base, sand and aggregate.
Can I use a vibratory plate on clay?
A vibratory plate works on granular materials — sub-base, sand, gravel. Clay is cohesive and does not respond well to vibration. For clay backfill in trenches, you need a rammer. Call us and we will confirm the right tool for your material.
What plate size do I need for a driveway?
A forward plate around 50 to 90kg handles most domestic driveways and patios. For larger commercial areas, a reversible plate covers more ground. Tell us the area and material when you call 01273 596 979.
Where can I find vibratory plate hire near me in Brighton?
Call 01273 596 979. Same-day collection from Southwick. Delivery across Brighton, Hove, Portslade, Southwick, Shoreham-by-Sea, Lancing, Worthing, Steyning, Henfield, Burgess Hill, Hassocks, Lewes, Newhaven, Peacehaven, Littlehampton, Arundel and Chichester. Get Plant on Site Tomorrow.
Need Vibratory Plate Hire near me in Brighton or West Sussex?
Call 01273 596 979. Same-day dispatch from Southwick. Delivery across Brighton, Hove, Portslade, Southwick, Shoreham-by-Sea, Lancing, Worthing, Steyning, Henfield, Burgess Hill, Hassocks, Lewes, Newhaven, Peacehaven, Littlehampton, Arundel and Chichester.
