Confined Space Lifting in Melksham, Wiltshire
The Right Kit for Restricted Access
A tight opening does not mean the job waits. Coppard lift heavy loads into and out of restricted spaces across Melksham, Wiltshire, fully planned and CPCS-supervised, where a mobile crane could never set up.
A machine that needs to drop into a basement, a boiler through a single doorway, a unit into a courtyard with no crane access. These are the jobs confined space lifting is built for, and Coppard run them across Melksham, Wiltshire. Hire and rental in Melksham brings the compact kit, the qualified operator, and the documented lift plan to the site.
What Confined Space Lifting Equipment Do You Need in Melksham?
Access first, load second. The doorway, corridor, and headroom decide what can physically get to the lifting point, and the floor loading decides what can safely operate there. Only once those are known does the load weight and its final position settle which piece of kit does the job.
Compact cranes do most of it. A spider crane folds down to doorway width and spreads to stay level on rough or partial floors; a mini crane does similar in even less room. When the space beats both, mechanical lifting gear and vacuum lifters take the load instead.
Our Confined Space Lifting Range
Whatever the restricted-access job, there is kit for it — machinery moves, glazing, basement work, plant installations. The list runs from compact cranes and material lifts through floor cranes and vacuum lifters to spreader beams, chains, and strops, sized and rated to your specific load.
Supplied bare or fully operated, whichever the job needs. A CPCS-qualified operator reads the lift plan and RAMS pack and rigs accordingly, with backup kit on board so a small change on site does not cost you a return trip. View the whole range in the spider crane collection. This service sits under Crane Service in Melksham.
Confined Space Lifting for Melksham Sites
Sat on the River Avon alluvial floodplain, Melksham sites are working ground you have to plan around. It is soft, wet ground more often than not, so the setup calls for a rammer and wider bearing plates to stop an outrigger sinking. The survey reads the ground first so the lift is set up right.
Melksham runs heavy on riverside mills, older town-centre premises, and farm conversions, and those buildings were not built with plant loads in mind. Doorways are tight, ceilings are low, floors have limits. A rig that suits one can be wrong for the next, so Coppard survey first, cover Chippenham and Devizes too, and ask for photographs and measurements before the day.
Operated Confined Space Lifting and What to Expect
The process is short. Call 01380 828988, describe the load and the access, and a CPCS-qualified operator visits to measure and plan. Door widths, headroom, floor loading, and overhead clearance all go into a site-specific lift plan and RAMS pack, alongside exclusion zones and emergency cover. Come the day, the kit arrives ready, the load is rigged on rated gear, and the supervised lift finishes signed off at the quoted price.
Why Choose Coppard for Confined Space Lifting
The Melksham depot answers 01380 828988 directly. Coppard have been lifting and hiring plant since 1972, a CPA member and Constructionline-registered business with 54 years behind it. Gear is maintained, inspected, and rated before every job; most of it mobilises the same or next day once the plan is signed off; and trade accounts get priority on the spider cranes and spreader beams. The work goes into the planning, which is exactly why the lifts run clean.
Frequently Asked Questions: Confined Space Lifting in Melksham, Wiltshire
Do I need a lift plan for confined space lifting in Melksham?
Yes. A confined space lift must be planned around the load, access, kit, and site conditions before work begins. Coppard produce the lift plan and RAMS pack for you as part of the job, so you do not need to prepare it yourself.
What equipment can fit through a narrow doorway?
Compact spider cranes, mini cranes, material lifts, and floor cranes can fit through narrow doorways or corridors, depending on the model. Measure the narrowest access point and the working space around the load before booking, so Coppard can match the right kit to the job.
Can confined space lifting be carried out in older Melksham buildings?
Yes. Older buildings often need careful planning because of narrow openings, low ceilings, and limited floor loading. Site measurements and photographs help Coppard identify the safest kit and lifting method before anything is mobilised.
How do I prepare the site before the lifting team arrives?
Clear the access route, get the working area ready, and check the floor or ground will take the equipment. Look out for low ceilings, overhead services, underground services, weak floors, and anything else that could affect delivery or the lift. Photographs, measurements, and the project postcode all help spot problems before mobilisation. The Health and Safety Executive sets out how lifting operations should be planned.
Need Confined Space Lifting in Melksham, Wiltshire?
Got a fixed handover date? The lift plan and survey take time to do properly, so the earlier you call, the safer your programme. Same or next-day mobilisation may be available across Melksham, Wiltshire, Chippenham, and Devizes, subject to kit, operator, and site requirements. Call 01380 828988.
