Wacker Plate Hire in Brighton, West Sussex
Compaction That Holds on Any Sub-Base
Petrol and diesel wacker plates for driveways, patios and sub-base preparation, available from our Southwick depot. Call 01273 596 979 to check availability.
54 Years Trading
CPA Member
Constructionline
Fully Insured
A hand tamper will not compact a driveway sub-base to the density you need. Granular fills and sub-bases need proper compaction passes to perform, and the wrong machine slows the whole job down. Coppard supplies petrol and diesel wacker plates for same or next-day hire across Worthing, Lancing and West Sussex from our Southwick depot — one call and the right machine is on its way to your site. If you are searching for wacker plate hire near me in Brighton, call 01273 596 979.
When Do You Need a Wacker Plate?
Any job that involves placing granular fill and needs it firm: driveways, patios, footpaths, shed bases, garden paths, utility trench reinstatement. The wacker plate vibrates the material into a stable, interlocked mass.
Across Hove, Portslade and Shoreham-by-Sea, most domestic groundworks start with MOT Type 1 or sharp sand laid in layers. The wacker plate compacts each layer before the next goes down. On made ground or backfilled areas, compaction prevents settlement that cracks paving or shifts slabs later.
If your material is clay — not granular — a rammer is the better tool. Clay-with-flints from the Downs above Brighton and Hove does not compact under vibration. Call 01273 596 979 and describe your material. We will confirm the right machine.
Wacker Plate Hire Range
New patio bases, driveway sub-bases, footpath foundations and shed bases across Hove, Portslade and Shoreham-by-Sea all need compacting before the finished surface goes down. Skip this step and the surface settles, cracks and needs redoing. The best sub-base preparation uses a wacker plate on each 150mm layer until the plate no longer sinks.
The Southwick depot stocks petrol and diesel wacker plates. All machines are serviced between hires and arrive ready to run. Petrol models suit domestic and light commercial work. Diesel models handle longer shifts and heavier fills on commercial sites.
Plate weights range from around 50kg for path and patio work to heavier models for road reinstatement and car park sub-base. A paving pad attachment is available for compacting block paving without scuffing.
Full specifications for the complete wacker plate range are listed in the Coppard online catalogue.
Wacker Plate Hire Across Brighton and West Sussex
Collection from the Southwick depot is the quickest option — most wacker plates fit in a van or estate car boot. Delivery is also available across Hove, Portslade, Shoreham-by-Sea, Worthing, Lancing and the wider area.
Contractors and trades across Hove, Portslade, Shoreham-by-Sea, Worthing, Lancing and Burgess Hill hire from this depot regularly. Looking for wacker plate hire near me? Same-day collection or next-day delivery.
Collecting and Using Your Wacker Plate
Wacker plates are compact enough to collect in a van. The yard team shows you the start procedure, throttle control and kill switch at collection. Compact in 150mm layers, overlap passes and keep the plate moving.
Call 01273 596 979 to check availability.
For block paving projects across Lewes, Steyning and Arundel, the final pass with a paving pad attachment beds the blocks into the laying course without damaging them. On longer landscaping projects, consider hiring the wacker plate alongside a rammer if your backfill includes clay and granular layers.
Why Hire a Wacker Plate from Coppard?
54 years supplying compaction plant across West Sussex. We stock wacker plates, vibratory plates, rammers and rollers — the full compaction range. If you are not sure which tool your job needs, call 01273 596 979 and describe your material. We will tell you.
Searching for the best wacker plate hire near me? Coppard covers Brighton, Hove, Portslade, Southwick, Shoreham-by-Sea, Lancing, Worthing, Steyning, Henfield, Burgess Hill, Hassocks, Lewes, Newhaven, Peacehaven, Littlehampton, Arundel and Chichester. Call 01273 596 979.
For the full range of Plant & Machinery Hire available from our Southwick depot, visit the Plant & Machinery Hire page.
View the full Wacker Plate Hire catalogue — specifications, models and current availability.
Frequently Asked Questions — Wacker Plate Hire
Is a wacker plate the same as a vibratory plate?
Yes. A wacker plate is a vibratory plate — the name comes from the manufacturer Wacker Neuson. Both use vibration to compact granular materials like sub-base, sand and gravel.
Can I use a wacker plate on clay?
No. Clay is cohesive and does not respond to vibration. For clay backfill in trenches, you need a rammer. For granular materials like Type 1 sub-base, a wacker plate is the right tool.
What size wacker plate do I need?
For driveways and patios, a plate around 50 to 90kg handles the job. For larger areas and deeper fills, heavier plates are available. Tell us your job when you call 01273 596 979 and we will match the plate to the work.
Where can I find wacker plate hire near me in Brighton?
Call 01273 596 979. Same-day collection from Southwick. Delivery across Brighton, Hove, Portslade, Southwick, Shoreham-by-Sea, Lancing, Worthing, Steyning, Henfield, Burgess Hill, Hassocks, Lewes, Newhaven, Peacehaven, Littlehampton, Arundel and Chichester. Get Plant on Site Tomorrow.
Need Wacker Plate Hire near me in Brighton or West Sussex?
Call 01273 596 979. Same-day dispatch from Southwick. Delivery across Brighton, Hove, Portslade, Southwick, Shoreham-by-Sea, Lancing, Worthing, Steyning, Henfield, Burgess Hill, Hassocks, Lewes, Newhaven, Peacehaven, Littlehampton, Arundel and Chichester.
