S30 Cutting bar

There are two models of cutting bars that mount on the sidearms with the S30 quick-attach system (both on the mechanical & hydraulic sidearm). They cannot be mounted on the attachment coupling plate of the loader.

The A430938 cutting bar is equipped with the same cutting blades and blade guides as the A35676 cutting bar. The frame and actuator mechanism are however stronger, which means the A430938 bar is optimized for hedge cutting and doesnโ€™t work too well with hay because of the higher frame. There are wear plates at each end of the cutting bar, useful when working on paved and asphalt surfaces for instance.

Theย A434613ย cuttingย barย with doubleย knives is a more precise hedge cutter and makes a cleaner cut thanks to the double knife design which cuts the branches by sawing them.

The mounting bracket of the cutting bars is pivoted and locked with a bolt, and can be turned manually in different positions. This gives the possibility to for instance cut the hedge horizontally, vertically and in different angles.The cutting bars are also equipped with a pressure relief valve which protects the unit if it hits an obstacle.

Efficient and quick hedge cutter also for higher hedges
Cutting both horizontally and vertically thanks to pivoting mounting bracket
Two models
Multi connector on hydraulic hoses available as an option, for mounting on the S30 side arms (side arm must also be equipped with multi connector)

More Images & Videos

Technical Information

A430938 A434613
Working width 1500 mm 1500 mm
Total width 1600 mm 1790 mm
Weight 90 kg 58 kg
Product no. A430938 A434613

 

The optional Opticontrolยฎ is required on the loader.

Options

A443003 Multi connector (3 connectors) + holder

Compatible Models

incompatible icon220
incompatible icon225
incompatible icon225LPG
incompatible icon313S
incompatible icon320S
very-compatible icon420 & 423
very-compatible icon520
very-compatible icon523
very-compatible icon525LPG
very-compatible icon528
very-compatible icon530
very-compatible iconR20
very-compatible iconR28
very-compatible iconR35
very-compatible icon630
very-compatible icon635
very-compatible icon640
very-compatible icon735
very-compatible icon745
very-compatible icon750
very-compatible icon755i
very-compatible icon760i
very-compatible icon850
very-compatible icon860i
very-compatible icone513
very-compatible icone527

More Attachments

[#Beginning of Shooting Data Section]
Image Size:L (4800 x 3200), DX
17.2.2017 11:11:35.10
Time Zone and Date:UTC+2, DST:ON
Lossless Compressed RAW (12-bit)
Artist:JORMA RAJAMAKI                      
Copyright:(c) JORMA RAJAMAKI  jorma@studiorajamaki.fi           
Image Comment:(c) jorma@studiorajamaki.fi         
Nikon D800
Lens:24-70mm f/2.8G
Focal Length:70mm
Focus Mode:Manual
AF-Area Mode:Single
VR:
AF Fine Tune:OFF
Aperture:f/10
Shutter Speed:1/160s
Exposure Mode:Manual
Exposure Comp.:0EV
Exposure Tuning:
Metering:Matrix
ISO Sensitivity:ISO 100
Device:
White Balance:Auto2, 0, 0
Color Space:Adobe RGB
High ISO NR:ON (Normal)
Long Exposure NR:OFF
Active D-Lighting:OFF
Image Authentication:
Vignette Control:OFF
Auto Distortion Control:OFF
Picture Control:[NL] NEUTRAL
Base:[NL] NEUTRAL
Quick Adjust:-
Sharpening:2
Contrast:0
Brightness:0
Saturation:0
Hue:0
Filter Effects:
Toning:
Optimize Image:
Color Mode:
Tone Comp.:
Hue Adjustment:
Saturation:
Sharpening:
Latitude:
Longitude:
Altitude:
Altitude Reference:
Heading:
UTC:
Map Datum:
[#End of Shooting Data Section]
ketjukaivuri_1
Avant-drum-type-concrete-mixer-5
grain-flour-dispenser-series-2-2

Not sure what you are looking for?

Contact our expert team today to discuss your needs and we'll find the right equipment for you!

Contact Our Experts Today

Equipment Enquiry

Call our Godstone branch to enquire about our equipment or fill out the form with your enquiry and someone will get back to you as soon as possible.

Call

Enquiry Form





    What do you require? (required)


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.